CCIE Routing & Switching Training Courses - Networking
INTRODUCTION : CCIE is the third level of the Cisco certification. The course is customized keeping in mind the ultimate aim of achieving technology expertise and CCIE R&S Lab Exam. It includes intensive CCIE-lab workshop to improve time-management & troubleshooting skills. At the end of the course candidates are ready to attempt the CCIE lab exam at Cisco Systems.
The CCIE Routing and Switching certification is a respected networking certification, recognizing network engineers for their knowledge, skills and expertise of Cisco solutions. This training will provide you with profound technical knowledge to design and implement complex solutions. The eight-hour lab exam tests your ability to configure actual equipment and troubleshoot the network in a timed test situation. You must make an initial attempt of the CCIE lab exam within 18-months of passing the CCIE written exam. If you do not pass the lab exam within three years of passing the written exam, you must retake the written exam before being allowed to attempt the lab exam again.
Our head office situated in Thane and training centre available in Borivali Mumbai, Navi Mumbai, India. We provide Online Training across the world.
CCIE Routing and Switching
DURATION: 120 Hours
Daily Batches :
(4 Hours Monday to Friday)
Fast Track Full Time Batches :
(8hrs Monday to Friday)
Weekend Batches :
(8 hours Saturday and Sunday)
Please Get in Touch With Us !!!
ENROLL FOR THIS COURSE NOW AND GET AHEAD IN YOUR CAREER
COURSE HIGHLIGHTS
- The course is based on CISCO guidelines
- Dedicated attention by instructors to Monitoring and evaluate candidates' progress on a daily basis
- Daily lab exercises to give extensive familiarity with the equipment
- Regular evaluation
- Industry Experienced CISCO Certified instructors
- The CCIE module is designed to meet the objective of the CCIE program.
- The course is customized keeping in mind the ultimate aim of achieving technology proficiency and CCIE certification.
- Dedicated Professional to manage, track and evaluate the candidate's performance from registration to completion.
- This course is especially beneficial for candidates who aim at building academic knowledge that is supplemented by applied lab exercises.
- 120 Hours, of intensive training+ rigorous lab exercises.
- Course kits contains reference material and add ons to enable students prepare better.
- Apt balance of theoretical and practical application
- Customized tests at the end of course to ensure best results.
- Stern passing standards with progress report of each candidate.
- Facility of Lab on cloud for students who want to practice remotely
- Students can attend the same lecture numerous times till they feel comfortable with the topic.
COURSE OBJECTIVES
- Discuss the CCIE R&S Lab Program and its content and elaborate on approach to expertise technologies required to pass CCIE Lab exam
- Discuss your baseline status for Cisco CCIE lab readiness
- Expertise L2 features and functions and master the skills of monitoring, analysis, configuration and troubleshooting L2 Technologies.
- Resolve expert-level IPv4 and IPv6 connectivity issues
- Expertise L3 Protocols, develop proficiency on L3 features and functions and master the skills of monitoring, analysis, configuration and troubleshooting L3 Protocols.
- Expertise BGP, develop proficiency on multi-homed environment, BGP attributes and master the skills of monitoring, analysis, configuration and troubleshooting BGP.
- Resolve expert-level core task in multi-protocol environment, analysis, configuration, and troubleshooting looping issue.
- Resolve expert-level DMVPN, MPLS L3 VPN configuration tasks.
- Expertise Multicast and its Protocols, develop proficiency on monitoring, analysis, configuration and troubleshooting Multicast.
- Expertise MQC QoS features and functions and master the skills of monitoring, analysis, configuration and troubleshooting QoS Techniques.
- Resolve and configure expert-level IP / Network Services task, Monitor, analyse, configure, and troubleshoot issues related to IP / Network Services
- Resolve expert-level multi-protocol, multi-technology, multi-featured core and advanced issues. Monitor, analyse, configure, and troubleshoot issues
- Expertise the logic of controlling access to networks & devices, minimizing overhead traffic, select and configure the appropriate access list features.
- Understand and configure new IOS features in multi-protocol environment.
Following Topics will be covered in CCIE Lab Course.TOPICS COVERED
LAYER 2 TECHNOLOGIES:
- LAN switching technologies
- Implement and troubleshoot switch administration
- Managing MAC address table
- errdisable recovery
- L2 MTU
- Implement and troubleshoot layer 2 protocols
- CDP, LLDP
- UDLD
- Implement and troubleshoot VLAN
- access ports
- VLAN database
- normal, extended VLAN, voice VLAN
- Implement and troubleshoot trunking
- VTPv1, VTPv2, VTPv3, VTP pruning
- dot1Q
- Native VLAN
- Manual pruning
- Implement and troubleshoot etherchannel
- LACP, PAgP, manual
- layer 2, layer 3
- load-balancing
- etherchannel misconfiguration guard
- Implement and troubleshoot spanning-tree
- PVST+/RPVST+/MST
- switch priority, port priority, path cost, STP timers
- port fast, BPDUguard, BPDUfilter
- loopguard, rootguard
- Implement and troubleshoot other LAN switching technologies
- SPAN, RSPAN, ERSPAN
LAYER 2 MULTICAST:
- Implement and troubleshoot IGMP
- IGMPv1, IGMPv2, IGMPv3
- IGMP snooping
- IGMP querier
- IGMP filter
- IGMP proxy
- Layer 2 WAN circuit technologies
- Implement and troubleshoot HDLC
- Implement and troubleshoot PPP
- authentication (PAP, CHAP)
- PPPoE
- MLPPP
- Troubleshooting layer 2 technologies
- Use IOS troubleshooting tools
- debug, conditional debug
- ping, traceroute with extended options
- Embedded packet capture
- Apply troubleshooting methodologies
- Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)
- Design and implement valid solutions according to constraints
- Verify and monitor resolution
- Interpret packet capture
- Using wireshark trace analyzer
- Using IOS embedded packet capture
LAYER 3 TECHNOLOGIES:
- Addressing technologies
- Identify, implement and troubleshoot IPv4 addressing and sub-netting
- Address types, VLSM
- ARP
- Identify, implement and troubleshoot IPv6 addressing and sub-netting
- Unicast, multicast
- EUI-64
- ND, RS/RA
- Autoconfig/SLAAC temporary addresses (RFC4941)
- Global prefix configuration feature
LAYER 3 MULTICAST:
- Troubleshoot reverse path forwarding
- RPF failure
- RPF failure with tunnel interface
- Implement and troubleshoot IPv4 protocol independent multicast
- PIM dense mode, sparse mode, sparse-dense mode
- Static RP, auto-RP, BSR
- Bidirectional PIM
- Source-specific multicast
- Group to RP mapping
- Multicast boundary
- Implement and troubleshoot multicast source discovery protocol
- Intra-domain MSDP (anycast RP)
- SA filter
FUNDAMENTAL ROUTING CONCEPTS:
- Implement and troubleshoot static routing
- Implement and troubleshoot default routing
- Compare routing protocol types
- Distance vector and link state
- Path vector
- Implement, optimize and troubleshoot administrative distance
- Implement and troubleshoot passive interface
- Implement and troubleshoot VRF lite
- Implement, optimize and troubleshoot filtering with any routing protocol
- Implement, optimize and troubleshoot redistribution between routing protocols
- Implement, optimize and troubleshoot manual and auto summarization with any routing protocol
- Implement, optimize and troubleshoot policy-based routing
- Identify and troubleshoot sub-optimal routing
- Implement and troubleshoot bidirectional forwarding detection
- Implement and troubleshoot loop prevention mechanisms
- Route tagging, filtering
- Split horizon
- Route poisoning
- Implement and troubleshoot routing protocol authentication
- MD5
- Key-chain
- EIGRP HMAC SHA2-256bit
- OSPFv2 SHA1-196bit
- OSPFv3 IPsec authentication
RIP V2:
- Implement and troubleshoot RIPv2
EIGRP (FOR IPV4 AND IPV6):
- Describe Packet types
- Packet types (hello, query, update, and such)
- Route types (internal, external)
- Implement and troubleshoot neighbor relationship
- Multicast, unicast EIGRP peering
- Implement and Troubleshoot Loop free path selection
- RD, FD, FC, successor, feasible successor
- Classic metric
- Wide metric
- Implement and troubleshoot operations
- General operations
- Topology table, update, query, active, passive
- Stuck in active
- Graceful shutdown
- Implement and troubleshoot EIGRP stub
- Stub
- leak-map
- Implement and troubleshoot load-balancing
- Equal-cost
- Unequal-cost
- Add-path
- Implement EIGRP (multi-address) named mode
- Types of families
- IPv4 address-family
- IPv6 address-family
- Implement, troubleshoot and optimize EIGRP convergence and scalability
- Describe fast convergence requirements
- Control query boundaries
- IP FRR/fast reroute (single hop)
- Summary leak-map
- Summary metric
OSPF (V2 AND V3):
- Implement and troubleshoot RIPv2
- Describe packet types
- LSA types (1, 2, 3, 4, 5, 7, 9)
- Route types (N1, N2, E1, E2)
- Implement and troubleshoot neighbour relationship
- Implement and troubleshoot OSPFv3 address-family support
- IPv4 address-family
- IPv6 address-family
- Implement and troubleshoot network types, area types and router types
- Point-to-point, multipoint, broadcast, non-broadcast
- LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
- Internal router, ABR, ASBR
- Virtual link
- Implement and troubleshoot path preference
- Implement and troubleshoot operations
- General operations
- Graceful shutdown
- GTSM (generic TTL security mechanism)
- Implement, troubleshoot and optimize OSPF convergence and scalability
- Metrics
- LSA throttling, SPF tuning, fast hello
- LSA propagation control (area types, ISPF)
- IP FR/fast reroute (single hop)
- LFA/loop-free alternative (multi hop)
- OSPFv3 prefix suppression
BGP:
- Describe, implement and troubleshoot peer relationships
- Peer-group, template
- Active, passive
- States, timers
- Dynamic neighbours
- Implement and troubleshoot IBGP and EBGP
- EBGP, IBGP
- 4 bytes AS number
- Private AS
- Explain attributes and best-path selection
- Implement, optimize and troubleshoot routing policies
- Attribute manipulation
- Conditional advertisement
- Outbound route filtering
- Communities, extended communities
- Multi-homing
- Implement and troubleshoot scalability
- Route-reflector, cluster
- Confederations
- Aggregation, AS set
- Implement and troubleshoot multi-protocol BGP
- IPv4, IPv6, VPN address-family
- Implement and troubleshoot AS path manipulations
- Local AS, allow AS in, remove private AS
- Prepend
- Regexp
- Implement and Troubleshoot Other Features
- Multipath
- BGP synchronization
- Soft reconfiguration, route refresh
TROUBLESHOOTING LAYER 3 TECHNOLOGIES:
- Use IOS troubleshooting tools
- Debug, conditional debug
- Ping, traceroute with extended options
- Embedded packet capture
- Apply troubleshooting methodologies
- Diagnose the root cause of networking issue (analyze symptoms, identify and describe root
- Design and implement valid solutions according to constraints
- Verify and monitor resolution
- Interpret packet capture
- Using wireshark trace analyzer
- Using IOS embedded packet capture
VPN TECHNOLOGIES:
- Tunneling
- Implement and troubleshoot MPLS operations
- Label stack, LSR, LSP
- LDP
- MPLS ping, MPLS trace route
- Implement and troubleshoot basic MPLS L3VPN
- L3VPN, CE, PE, P
- Extranet (route leaking)
- Implement and troubleshoot encapsulation
- GRE
- Dynamic GRE
- Implement and troubleshoot DMVPN (single hub)
- NHRP
- DMVPN with IPsec using preshared key
- QoS profile
- Pre-classify
- Encryption
- Implement and troubleshoot IPsec with preshared key
- IPv4 site to IPv4 site
- IPv6 in IPv4 tunnels
- Virtual tunneling interface (VTI)
TROUBLESHOOTING VPN TECHNOLOGIES:
- Use IOS troubleshooting tools
- Debug, conditional debug
- ping, trace route with extended options
- Embedded packet capture
- Apply troubleshooting methodologies
- Diagnose the root cause of networking issue (analyse s, identify and describe root cause)
- Design and implement valid solutions
- According to constraints
- Verify and monitor resolution
- Interpret packet capture
- Using Wireshark trace analyser
- Using IOS embedded packet capture
INFRASTRUCTURE SECURITY:
- Device security
- Implement and troubleshoot IOS AAA using local database
- Implement and troubleshoot device access control
- Lines (VTY, AUX, console)
- SNMP
- Management plane protection,
- Password encryption
- Implement and troubleshoot control plane policing
NETWORK SECURITY:
- Implement and troubleshoot switch security features
- VACL, PACL
- Storm control
- DHCP snooping
- IP source-guard
- Dynamic ARP inspection
- Port-security
- Private VLAN
- Implement and troubleshoot router security features
- IPv4 access control lists (standard, extended, time-based)
- IPv6 traffic filter
BGP:
- Unicast reverse path forwarding
- Implement and troubleshoot IPv6 first hop security
- RA guard
- DHCP guard
- Binding table
- Device tracking
- ND inspection/snooping
- Source guard
- PACL
TROUBLESHOOTING INFRASTRUCTURE SECURITY:
- Use IOS troubleshooting tools
- Debug, conditional debug
- Ping, trace route with extended options
- Embedded packet capture
- Apply troubleshooting methodologies
- Diagnose the root cause of networking issue (analyse, identify and describe root cause)
- Design and implement valid solutions according to constraints
- Verify and monitor resolution
- Interpret packet capture
- Using wire shark trace analyser
- Using IOS embedded packet capture.
INFRASTRUCTURE SERVICES:
- System management
- Implement and troubleshoot device management
- Console and VTY
- Telnet, HTTP, HTTPS, SSH, SCP
- (T)FTP
- Implement and troubleshoot SNMP
- v2c, v3
- Implement and troubleshoot logging
- Local logging, syslog, debug, conditional debug
- Timestamp
NETWORK SERVICES:
- Implement and troubleshoot first-hop redundancy protocols
- HSRP, GLBP, VRRP
- Redundancy using IPv6 RS/RA
- Implement and troubleshoot network time protocol
- NTP master, client, version 3, version 4
- NTP authentication
- Implement and troubleshoot IPv4 and IPv6 DHCP
- DHCP client, IOS DHCP server, DHCP relay
- DHCP options
- DHCP protocol operations
- SLAAC/DHCPv6 interaction
- Stateful, stateless DHCPv6
- DHCPv6 prefix delegation
- Implement and troubleshoot IPv4 network address translation
- Static NAT, dynamic NAT, policy-based NAT, PAT
- NAT ALG
NETWORK OPTIMISATION:
- Implement and troubleshoot IP SLA
- ICMP, UDP, jitter, VoIP
- Implement and troubleshoot tracking object
- Tracking object, tracking list
- Tracking different entities (e.g. interfaces, routes, IPSLA, and such)
- Implement and troubleshoot netflow
- Netflow v5, v9
- Local retrieval
- Export (configuration only)
- Implement and troubleshoot embedded event manager
- EEM policy using applet 2013
TROUBLESHOOTING INFRASTRUCTURE SERVICES:
- Use IOS troubleshooting tools
- Debug, conditional debug
- Ping, trace route with extended options
- Embedded packet capture
- Apply troubleshooting methodologies
- Diagnose the root cause of networking issue (analyse, identify and describe root cause)
- Design and implement valid solutions according to constraints
- Verify and monitor resolution
- Interpret packet capture
- Using Wireshark trace analyser
- Using IOS embedded packet capture
Connect with us !!
All trademarks, trade names, or logos mentioned or used are the property of their respective owners.
Every effort has been made to properly capitalize, punctuate, identify and attribute trademarks and trade names to their respective owners, wherever possible and practical.
The logos are being used only for training purposes. The logos are not authorized by, sponsored by, or associated with their respective trademark owners